Recommended Topic Related To:

KCL in NS

"The Food and Drug Administration (FDA) has announced that, in response to a trend in which caffeine is being added to a growing number of products, the agency will investigate the safety of caffeine in food products, particularly its effects on c"...

KCL in NS

INDICATIONS

Potassium Chloride in Sodium Chloride Injection, USP is indicated as a source of water and electrolytes.

DOSAGE AND ADMINISTRATION

As directed by a physician. Dosage is dependent upon the age, weight and clinical condition of the patient as well as laboratory determinations.

Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration whenever solution and container permit. Use of final filter is recommended during administration of all parenteral solutions, where possible.

All injections in VIAFLEX Plus plastic containers are intended for intravenous administration using sterile equipment.

Additives may be incompatible. Complete information is not available. Those additives known to be incompatible should not be used. Consult with pharmacist, if available. If, in the informed judgment of the physician, it is deemed advisable to introduce additives, use aseptic technique. Mix thoroughly when additives have been introduced. Do not store solutions containing additives.

HOW SUPPLIED

Potassium Chloride in Sodium Chloride Injection, USP in VIAFLEX Plus Plastic Container is available as follows:

Code Size (mL) NDC Product Name
2B1357 1000 0338-0704-34 20 mEq/L Potassium Chloride in 0.45% Sodium Chloride Injection, USP
2B1764 1000 0338-0691-04 20 mEq/L Potassium Chloride in 0.9% Sodium Chloride Injection, USP
2B1984 1000 0338-0695-04 40 mEq/L Potassium Chloride in 0.9% Sodium Chloride Injection, USP

Exposure of pharmaceutical products to heat should be minimized. Avoid excessive heat. It is recommended the product be stored at room temperature (25o C/77o F); brief exposure up to 40o C (104o F) does not adversely affect the product.

Directions for Use of VIAFLEX Plus Plastic Container

Warning: Do not use plastic containers in series connections. Such use could result in air embolism due to residual air being drawn from the primary container before administration of the fluid from the secondary container is completed.

To Open

Tear overwrap down side at slit and remove solution container. Some opacity of the plastic due to moisture absorption during the sterilization process may be observed. This is normal and does not affect the solution quality or safety. The opacity will diminish gradually. Check for minute leaks by squeezing inner bag firmly. If leaks are found, discard solution as sterility may be impaired. If supplemental medication is desired, follow directions below.

Preparation for Administration

  1. Suspend container from eyelet support.
  2. Remove plastic protector from outlet port at bottom of container.
  3. Attach administration set. Refer to complete directions accompanying set.

To Add Medication

Warning: Additives may be incompatible.

To add medication before solution administration

  1. Prepare medication site.
  2. Using syringe with 19 to 22 gauge needle, puncture resealable medication port and inject.
  3. Mix solution and medication thoroughly. For high density medication such as potassium chloride, squeeze ports while ports are upright and mix thoroughly.

To add medication during solution administration

  1. Close clamp on the set.
  2. Prepare medication site.
  3. Using syringe with 19 to 22 gauge needle, puncture resealable medication port and inject.
  4. Remove container from IV pole and/or turn to an upright position.
  5. Evacuate both ports by squeezing them while container is in the upright position.
  6. Mix solution and medication thoroughly.
  7. Return container to in use position and continue administration.

Baxter Healthcare Corporation Deerfield, IL 60015, USA. For Product Information 1-800-933-0303. Rev. March 2005. FDA Rev date: 5/1/2005

Last reviewed on RxList: 12/29/2008
This monograph has been modified to include the generic and brand name in many instances.

A A A

Report Problems to the Food and Drug Administration

 

You are encouraged to report negative side effects of prescription drugs to the FDA. Visit the FDA MedWatch website or call 1-800-FDA-1088.


Weight Loss Wisdom

Get tips, recipes and inspiration.

advertisement
advertisement
Use Pill Finder Find it Now See Interactions

Pill Identifier on RxList

  • quick, easy,
    pill identification

Find a Local Pharmacy

  • including 24 hour, pharmacies

Interaction Checker

  • Check potential drug interactions
Search the Medical Dictionary for Health Definitions & Medical Abbreviations